Six applications across cooling and power. Each page says what the test proves, which range does it and which equipment is used.
PowerLoad equipment generates the heat and simulates the load, so the system can be tested. It is not enough to put a large amount of heat into a room and say the cooling has been tested, because the whole cooling and power system has to respond when the load changes, in both directions. Base build testing proves capacity while the hall is built. End-of-line testing replicates the rack before the GPUs are installed.
Heat into the coolant loop, from the chillers to the rack.
Electrical load on the supply, from the riser to the rack.
Grey is what a conventional load bank asks of a hall. Orange is what a rack of AI accelerators asks of it. Dynamic testing applies the orange.
Every application can be tested with either range. The base build range proves capacity. The end-of-line range proves behaviour at each rack position.
Tell us the hall and the IT load. We will tell you which range and equipment fit.