A UPS that carries its rated load has proven capacity. AI load steps repeatedly, so the test is how the rectifier and batteries respond across many steps, up and down.

Testing a UPS means loading it with a controllable IT electrical load and logging how the rectifier, inverter and batteries respond as the load steps. Base build testing proves the UPS carries its rated load. End-of-line testing applies the repeated fast steps of AI racks, up and down, with the generator in circuit, so the response of the whole supply is proven.
Each point comes from logging across the whole run, not just the first step.
The UPS carries the full IT load, and runs on batteries for the time it should.
How input behaviour changes as steps repeat.
String behaviour under frequent shallow demand, as well as one deep discharge.
Whether the response stays stable across continuous steps rather than isolated ones.
The response when the load suddenly falls as well as when it rises.
A UPS is first proven for capacity, then for repeated response.
Base buildLB500, LB600 or LB700 for the rated load and battery runtime
End-of-lineLCLB 160 and LCLB 240 apply repeated steps at rack level, with solid-state switching
See the end-of-line rangeAny PowerLoad unit draws electrical load as it makes heat, so the UPS is tested with the same kit as the cooling.

Tell us the UPS arrangement and the IT load. We will help you build a cycling profile.