Base build

Base build testingLB500LB600LB700ACLB 200Standard or solid-state switching

End-of-line

End-of-line testingLCLB 160LCLB 240ACLB 60

Applications

Cooling

Chillers and cooling plantStatic and dynamic load testing

Power

UPS systemsGeneratorsSwitchgear and power qualityProtection settings

Explained

Liquid coolingGPU load testingWater qualityLoop monitoringCommissioning

Equipment

Commissioning equipment

Manifold trolleyFlushing & refill cart

Tools

The full rangeSizing calculatorDatasheets

Services

Commissioning supportLoad bank hireHigh load simulationBespoke load banksSupply and installationMaintenance and repairDeployment and managementBuy or hireProjects

Company

AboutPartnersProjectsAcademyNewsEventsFAQ Speak to the team
Home/Products/Base build testing

Liquid-cooled load banks for base build testing

Built to test the IT electrical and heat load in hyperscale liquid-cooled AI data centres, from 500kW to 700kW per liquid-cooled unit, plus the portable 200kW ACLB 200.

PowerLoad 500kW liquid-cooled load bank
500 to 700kWLiquid-cooled, per unit
700kWHighest single unit
250Units, one controller
OptionalSolid-state switching

What solid-state switching adds

Base build testing proves capacity. When the specification asks for it, solid-state switching adds a response test, with the load stepping fast enough to follow transient electrical spikes and surges.

Conventional load bank PowerLoad solid-state switching
Two kinds of switching

Standard or solid-state

Every unit has standard switching. Solid-state is an optional extra on the liquid-cooled units. How solid-state switching works →

StandardCONTACTOR
Solid-stateOPTIONAL
How it works
Steps the load up and down in set increments
No moving parts, steps the load far faster
Choose it for
Capacity tests of the chillers, CDU and risers
Response tests, when the specification asks for transient load
Base build testing

The base build range

One design in three sizes, with the same stainless steel internals and controls. Only the pipework and power supply change, from 4 inch at 500kW to 5 inch at 700kW.

A PowerLoad 500kW liquid-cooled load bank connected into the coolant loop in a live data hall
LB500

The 500kW liquid-cooled load bank

The entry unit of the range, with remote monitoring and recorded test data for sign-off. Two LB500s on a manifold give 1MW.

  • Power rating500kW per unit
  • Flow and return4 inch (DN100)
  • Flow range100 to 900 LPM
  • CoolantPG25 or water
  • SwitchingSolid state optional
Enquire about the LB500
How an AI GPU load ramps and drops
LB600

The 600kW liquid-cooled load bank

600kW of guaranteed heat output with a drained weight under 800kg. Solid-state switching is available as an option.

  • Power rating600kW per unit
  • Flow and return4 inch (DN100)
  • Flow range100 to 900 LPM
  • CoolantPG25 or water
  • SwitchingSolid state optional
Enquire about the LB600
PowerLoad LB700, a 700kW liquid-cooled load bank
LB700

The 700kW liquid-cooled load bank

The highest single-unit capacity in the range, in the same footprint as the LB500 and LB600. Stainless steel internals and integrated temperature control keep PG25 below 45°C, so it runs on the PG25 loops most AI halls use. Optional solid-state switching gives 1kW switching for fine load resolution.

  • Power rating700kW per unit
  • Flow and return5 inch (DN125)
  • CoolantPG25 compatible, held below 45°C
  • Internals304 or 316 stainless steel
  • SwitchingSolid state optional, 1kW
Enquire about the LB700
PowerLoad ACLB 200 portable 200kW air-cooled load bank
ACLB 200

The portable 200kW air-cooled load bank

A wheeled air-cooled unit for smaller loads and power-side tests, with load steps from 1kW.

  • Power rating200kW at 400V
  • Minimum step1kW
Full ACLB 200 specification
End-of-line testing

Testing at the rack comes next

Once the base build is proven, the end-of-line range replicates how the GPUs will behave at each rack position, before they are installed.

See the end-of-line range

What it is used for

Applications

Base build testingLB500 / LB600 / LB700 / ACLB 200
End-of-line testingLCLB 160 / LCLB 240 / ACLB 60
Used for
Proving the capacity of the chillers, CDU and risers while the hall is built
True rack-level heat and electrical replication of the GPUs, at each rack position
Benefit
Cooling plant problems surface while they are still cheap to fix
Test down to rack level, measuring flow, pressure, temperature and power
Standards

Key features

Hand built in the UK

Every unit is assembled and tested in-house.

304 or 316 stainless steel

Every part the coolant touches is stainless steel.

PG25 compatible

Runs on PG25, chilled or deionised water loops.

Solid-state switching

An optional extra for transient load tests.

Network up to 250 units

One controller drives the whole fleet.

Monitor the loop

Live flow, temperature and pressure readings.

Adjustable pressure drops

Pressure drop is set to match the design under test.

Variable delta T from 10°C

Set the temperature rise across the load bank to match the design.

Validated, exportable test data

Checked as it is captured and kept for sign-off.

Flexible bespoke power supplies

Each unit is built to suit the site supply.

Top or bottom connections

Coolant connections are placed to suit the hall.

Portable option

The ACLB 200 is a wheeled 200kW unit.

Watch

The kit, explained

What a 500kW liquid load proves
Designed for thermal accuracy
The manifold trolley
Solid-state switching explained
Testing before the hardware arrives
FAQ

Liquid-cooled load banks, answered

A liquid-cooled load bank rejects its heat into a coolant loop rather than into the air, so it connects directly to the data hall cooling infrastructure. In base build testing it proves the capacity of the chillers, CDU and risers while the hall is being built. The base build range runs from the 200kW ACLB 200 to the 700kW LB700.

They are the same design. The LB500 is rated at 500kW and the LB600 at 600kW, both on 4 inch flow and return with stainless steel internals and PG25 compatibility. Solid-state switching is an optional extra on either, not a separate model.

The LB700 is rated at 700kW and is the highest-capacity single unit. It runs on 5 inch flow and return, and optional solid-state switching gives 1kW switching for fine load resolution.

The ACLB 200 is a portable 200kW air-cooled load bank with load steps from 1kW. It is part of the base build range. The full specification is on the air-cooled load banks page.

The PowerLoad controller networks up to 250 load banks, monitored and driven from a single point with live flow, temperature and pressure and exportable test data.

Yes. The liquid-cooled load banks are available to hire. Speak to the team about availability for your project.

Downloads

Datasheets for these units

Full specification, flow rates and connection detail. Published documents download straight away; ask us for the rest and we will send the current revision.

Test your liquid-cooled hall before the IT equipment arrives

Tell us the IT load and the programme. We will size the kit around it.