Base build

Base build testingLB500LB600LB700ACLB 200Standard or solid-state switching

End-of-line

End-of-line testingLCLB 160LCLB 240ACLB 60

Applications

Cooling

Chillers and cooling plantStatic and dynamic load testing

Power

UPS systemsGeneratorsSwitchgear and power qualityProtection settings

Explained

Liquid coolingGPU load testingWater qualityLoop monitoringCommissioning

Equipment

Commissioning equipment

Manifold trolleyFlushing & refill cart

Tools

The full rangeSizing calculatorDatasheets

Services

Commissioning supportLoad bank hireHigh load simulationBespoke load banksSupply and installationMaintenance and repairDeployment and managementBuy or hireProjects

Company

AboutPartnersProjectsAcademyNewsEventsFAQ Speak to the team
Home/Explained/Water quality and flushing
Explained

Why water quality decides whether a liquid-cooled hall performs

Four explainers on coolant cleanliness, loop debris and what a proper flush involves.

A PowerLoad flushing and refill cart alongside load bank units
250LCart tank capacity
25µmFiltration
DualPump on the cart
OnceThe only window to flush

In a direct-to-chip system the coolant is part of the machine. It passes within millimetres of the die through very fine channels, so scale, weld debris or biological growth block flow, force chips to throttle and wear pumps and valves early. The loop can only be flushed, drained, dried and charged properly before the racks go live.

Where the debris comes from

A new system is the dirtiest it will ever be

Freshly cut and welded pipework leaves slag, filings and mill scale behind, and once the loop is filled that debris travels towards the pumps and the cold plates.

  • Water left standing warm and still starts biological growth on top of that
  • Even a thin layer of scale reduces heat transfer
  • Debris narrows or blocks the cold plate micro-channels, so the chip throttles or trips out
  • Trapped air displaces coolant, and the unstable temperatures it causes get mistaken for equipment or control faults
A PowerLoad flushing cart connected to a cooling circuit on site
Why it has to happen now

You cannot drain the loop once the racks are live

Once compute is installed you cannot drain and flush the loop without taking the hall out of service, so the water quality you go live with is what you keep.

  • Flush, drain, dry, then charge with nitrogen so nothing corrodes while the system waits to run
  • Steady pressure and flow are what carry debris out and clear trapped air
  • Flushing happens before load testing, so the readings the tests depend on can be trusted
  • The cart runs again after testing, which protects the units between jobs
Flushing and refill carts
Watch and read

Four explainers on coolant cleanliness and flushing

Where loop debris comes from, what a proper flush, dry and nitrogen charge involves, and why the cart is connected before anything is tested.

FAQ

Water quality and flushing, answered

Not properly. Once compute is installed and the system is live you cannot drain and flush the loop without taking the hall out of service, so the water quality you go live with is what you keep. The flush belongs before the racks arrive.
Cold plates use micro-channels to move heat away from the die. Debris and scale narrow or block those channels, which reduces the heat the plate can carry away and causes the chip to throttle or trip out.
It fills, flushes, filters and drains a liquid cooling circuit at controlled pressure and flow, removing trapped air, debris and contaminants so the loop is stable before load testing begins.
Air displaces coolant, restricts flow and moves around the circuit under pressure. It produces unstable temperatures and inconsistent readings that are easily mistaken for equipment or control faults, so it wastes diagnostic time as well as degrading cooling.
Before load testing begins. The point of flushing is to make the readings you take during commissioning trustworthy, so it has to happen ahead of the tests that depend on those readings.
Where to next

Related reading

Getting the water right, once?

The flush happens before the racks go live. We will walk you through the flush, dry and nitrogen charge process.